Posted inFeatured
Posted inEngineering Drawing
Projection of Points Basics
Projection of Points – Point’s position will be given in data. We need to find…
Posted inEngineering Drawing
Projection of Straight Lines (Problem 1)
Problem-1 Projection of Straight Lines – A line AB, 60 mm long, is inclined at…
Posted inEngineering Drawing
Projection of Solids ( Problem 1)
Problem - 1 Projection of Solids – A pentagonal pyramid has height 60 mm and…
Posted inEngineering Drawing
Section of Solids (Problem 1)
Problem - 1 Section of Solids – A cone with base circle diameter 60 mm…
Posted inEngineering Drawing
Development of Surfaces of Solids (Problem 1)
Problem - (1) Development of Surfaces of Solids – A cone made up of Aluminium…
Posted inEngineering Drawing
Engineering Curves (Problem 1)
Problem -1, Engineering Curves – Draw Ellipse, Parabola and a Hyperbola on the same axis…
Posted inEngineering Drawing
Ellipse by Directrix-Focus Method
Point F Is 50 mm from a Directrix AB. A Point P is moving in…
Posted inEngineering Drawing
Definition of Engineering Curves
Definition of Engineering Curves – When a cone is cut by a cutting plane with different…
Posted inEngineering Drawing
Loci of Points ( Problem 1)
Problem 2.1 Loci of Points – OBA is a simple crank chain. OB is a…
Posted inEngineering Drawing
Sectional Orthographic Projection (Problem 1)
Problem 1- Sectional Orthographic Projection – Draw the Sectional Orthographic Projections of the object given in figure-3 Draw…