Posted inFeatured
Posted inTheory of Machines
Method of resolution of forces
Considering the equilibrium of the forces acting at D, we have Again, considering the equilibrium…
Posted inTheory of Machines
Porter Governor
The Porter governor is a modification of a Watt’s governor, with central load attached to…
Posted inTheory of Machines
Watt Governor
The simplest form of a centrifugal governor is a Watt governor, as shown in Fig.…
Posted inTheory of Machines
Terms Used in Governors
The following terms used in governors are important from the subject point of view ;…
Posted inTheory of Machines
Centrifugal Governors
The centrifugal governors are based on the balancing of centrifugal force on the rotating balls…
Posted inTheory of Machines
Types of Governors
The governors may, broadly, be classified as 1. Centrifugal governors, and 2. Inertia governors. The centrifugal governors,…
Posted inTheory of Machines
Backlash
The gap between the non-drive face of the pinion tooth and the adjacent wheel tooth…
Posted inTheory of Machines
Interference in Involute Gears
The tooth tip of the pinion will then undercut the tooth on the wheel at…
Posted inTheory of Machines
Length of Arc of Contact
Arc of contact is the path traced by a point on the pitch circle from…
Posted inTheory of Machines
Length of Path of Contact
Consider a pinion driving wheel as shown in figure. When the pinion rotates in clockwise,…