Locomotive Boiler

Locomotive boiler is a horizontal drum axis, multi-tubular, natural circulation, artificial draft, forced circulation, mobile, medium pressure, solid fuel fired fire tube boiler with an internally fired furnace. It is used in railway locomotive engines and in marine. It is a mobile boiler and has a high steam generation rate.

Construction or Main  Parts

 

The construction or main parts of a locomotive boiler are

1. Fire hole:

It is a hole provided at the rear end of the boiler. The solid fuel is inserted and ignited into the furnace through this hole.

2. Fire box:

It is a box in which the burning of the fuel takes place.

3. Grate:

Grate is a platform on which the solid fuel is kept and burnt.

4. Fire brick arch:

It is a brick arch placed inclined over the grate. It prevents the entry of the ash, dust and burnt fuel particles into the fire tubes. It provides a way to the hot flue gases to travel a definite path before entering into the fire tubes of the boiler.

5. Boiler tubes:

They are the fire tubes through which the hot flue gases pass and exchange the heat with the surrounding water.

6. Smoke box:

According to its name, it is a box in which the smoke of the burnt fuel after passing through the fire tubes gets collected. From there it is exhausted in the environment by the chimney.

7. Blast pipe:

It is a pipe provided above the steam engine. The exhaust steam passes through this blast pipe. It is used to create an artificial draft that pushes the smoke out through the chimney and creates suction for the hot flue gases. The suction created allows the hot flue gases to move forward through the fire tubes.

8. Steam pipe:

It is a pipe through which the steam passes. We have two steam pipes; one is the main steam pipe present in between the superheater header and dome. And the second one is that which connects the superheater exit end to the steam engine.

9. Superheater:

It superheats the steam to the desired temperature before entering into the cylinder of the steam engine.

10. Super heater element pipes:

These are the pipes of superheater through which the steam travels and gets superheated.

11. Dome:

It is present at the top and contains the regulator for regulating the steam produced through the steam pipe.

12. Regulator valve:

It is a valve that regulates the steam through the main steam pipe for superheating.

13. Safety valve:

It is used to maintain the safe working steam pressure in the locomotive boiler. It blows off steam when the pressure of the steam increases above safety level and prevents blasting of the boiler.

14. Superheater header:

It is the head of the superheater which accepts the steam from the steam pipe.

15. Chimney:

It is used to throw out the exhaust smoke and gases to the environment. The length of the chimney is very small in this boiler.

Working of Locomotive Boiler

 

        In the locomotive boiler, first, the solid fuel (coal) is inserted on the grate and is ignited from the fire hole. The burning of the fuel starts and it creates hot flue gases. A fire brick arch is provided that makes the flow of hot flue gases to a definite path before entering into the long tubes (fire tubes). It also prevents the entry of burnt solid fuel particles into the fire tubes.

        The hot flue gases pass through the long fire tubes and heat the water surrounding them. Due to the heating, the water gets converted into saturated steam and gets collected at the top.

          The saturated steam from the dome enters into the main steam pipe through the regulator valve. The steam travels in the main steam pipe and reaches to the superheater header. Form header, the steam enters into superheater element pipes. Here it is superheated and then the superheated steam enters into the steam pipe of the smoke box.

           The steam from the superheater goes to the cylinder containing piston. The superheated steam made the piston moves within the cylinder. The piston is connected to the wheels of the steam engine and the wheels start rotating.

          The exhaust steam from the cylinder enters into the blast pipe. The burnt gases and smoke after passing through the fire tubes enter into the smokebox. The exhaust steam coming out from the blast pipe pushes the smoke out of the boiler through the chimney. Here the smoke cannot escape out from the boiler on its own, so artificial draft is created by exhaust steam coming out from the steam engine. This artificial draft created pushes the smoke out of the smokebox and creates suction for the hot flue gases.

Related Posts

Comments are closed.

© 2024 Mechanical Engineering - Theme by WPEnjoy · Powered by WordPress