Do You Know Why Electric Motors Generate Reverse Electromotive Force?

Brushless DC motors (BLDC) are used where there are limitations in the use of the brush-type DC motors. In this article we discuss how it is possible operate a DC motor with no brush arrangement and also explain the back EMF in a brushless DC motor (BLDC).

A DC motor is a one which operates on a supply from a DC source. The DC source may be either a DC generator or from a battery. DC motors may be classified as:

○      Series wound DC motor

○      Shunt wound DC motor

○      Compound wound DC motor

○      Separately wound DC motor

In all types of DC motors, the supply is given to both stators to make it as an electromagnet. This supply is necessary because the operation of a DC motor depends on the attraction and repulsion principles of magnetism.

In the stator, the supply voltage from a DC source is given directly, and in the rotor of DC motor it is supplied by means of a brush arrangement. But in case of brushless DC motors, this supply voltage to the rotor should be supplied without any brush arrangement. Brushless DC motors are more complicated than ordinary DC motor with brush arrangements, but certain applications needs this brushless DC motor, and hence it exists.

In a brushless DC motor (BLDC), we have an exciter rotor mounted on the same shaft of the rotor of a DC motor. This exciter stator induces an EMF when a small voltage is applied to the stator of this exciter. The voltage induced in the exciter rotor is an AC voltage and this is rectified to DC by means of a rotating rectifier diode arrangements mounted on the same shaft of the motor. The rectified DC voltage is applied to the rotor of DC motor, and there is no brush required so the DC motor with this type of complicated arrangement is called a brushless DC motor (BLDC).

Understanding Back EMF in Electric Motors

A notable disadvantage associated with BLDC motors is the generated back EMFs by its winding when operated. The following discussion explains the origin of these unwanted back EMFs.

According to Faradays law of electromagnetic induction, when a current carrying conductor is placed in a magnetic field (that is, if the conductor cuts the magnetic field), an EMF is induced or produced in a conductor and if a closed path is provided, current flows through it.

When the same thing happens in a brushless DC motor (BLDC) as a result of motor torque, the EMF produced is known as “back EMF.” It is so called because this EMF that is induced in the motor opposes the EMF of the generator.

This back EMF that is induced in the brushless DC motor (BLDC) is directly proportional to the speed of the armature (rotor) and field strength of the motor, which means that if the speed of the motor or field strength is increased, the back EMF will be increased and if the speed of the motor or field strength is decreased, the back EMF is decreased.

This back EMF created acts as a resistance, and we all know that any resistance in a line reduces and opposes the current flow so if the speed of the DC motor or field strength is increased, the back EMF increases which in turn increases the resistance to the current flow in windings and hence only less current is delivered to the armature of DC motor. Also if the speed of DC motor armature or field strength decreases, the back EMF decreases, which in turn reduces the resistance and hence more current flow to the armature of DC motor.

When the DC motor is first started, there is no back EMF induced and as discussed above there is maximum current flow from the DC generator or distribution lines to the motor armature and as a result the motor toque will be maximum. In this case there is no resistance offered by back EMF. The only resistance available is the motor winding resistance.

During normal operation (rated speed) of DC motor, the back EMF induced will be maximum which reduces the motor armature current to its minimum level and as a result the motor torque is also reduced.

When the load on the motor is increased, the motor speed (RPM) is decreased and this reduces the back EMF. This decrease in back EMF automatically increases the motor torque thereby bringing the motor to its rated speed.

Related Posts

Comments are closed.

© 2024 Mechanical Engineering - Theme by WPEnjoy · Powered by WordPress